书画中国 DrawChina

 找回密码
 注册
搜索
查看: 81590|回复: 851

[6 Mar][DL Desire v4.31.44.12][Sense RE-Engineering][IMG/EXT4/RAM]

    [复制链接]
发表于 2011-2-7 12:41:38 | 显示全部楼层 |阅读模式
Post Last Edited by dandiest at 2011-3-7 00:35

DL Desire v4.31

This is a very interesting release, as I always like to experience something new, thus, I managed to merge some advantage features from DHD into this build, it is now not exactly Z or HD, it's a mixed version.   
I have also added a lot performance optimizations into this build, I'm quite confident that its performance is unbeatable until our optimization method or code will be copied again.

new features for SuperInit v4.4

-- Buildin with IMG/EXT4/RAM support
--- by default will create a 16M RAMfs and use it as app_cache and cache.
         --- once set the ram_data=1, will move the dalvik-cache of framwork into RAM
         --- to roll back to normal status, use the ram_data=11
-- Optimize the nand_data, which will also be able to move the dalvik-cache of framwork into Nand.
-- add new backup_img=2 to back apps from data, which is used for changing the build, the backup_img=1 will back up the whole data, once restore to a new base, will incur the UID inconsistent issue. should use restore_img=2 to restore.
--  add more function for repair_mode
         -- repair_mode=1 will rescue the data partition.
         -- repair_mode=2 can use the MAGLDR load system to repair the Nand system and mount the Nand system to /mnt/rescue
         -- repair_mode=3 will reset the system, all the modified app, framework, lib, fonts that caused the issue will be removed, system will be reset to the origin without losing data and settings.


-- Auto detect the phone modal(EU or TMOUS)
    --- for EU modal, will auto enable the data.img if the 2nd partition can not be found.
    --- for TMOUS, if doesn't have 2nd partition and set the data_img=1, will auto bypass all the relative code to reduce the boot time.

-- Auto detect the boot mode (SD/MAGLDR/NAND)
   --- auto select the best configuration for each boot mode
   --- for SD, no need to apply the mobile data fix anymore (need test)

-- Auto partitioning the SDCard if set the format_ext4=9 (need test)
-- Fixed a lot of bugs in previous version.


Features:
-  base on the newest DesireZ 1.85.73.2
-  modified with full languages and locations.
-  add battery percentage.
-  equipped with DL SuperInit v4.4
-  equipped with freak kernel v1.3
-  all work and more smooth.
-  improved battery life
-  home screen rotatable.
-  merged a lot of DesireHD features, e.g. smaller fonts
-  keyboard with arrow.

Chagelog:
-  Recreate the build.
-  Added the advanced power menu.-  Added launchkey customization.
-  Tuned the system performance again.
-   Fixed many defects.

Download:

DL Desire v4.3
suggest set the ram_data=1 to experience the power of our ramfs, but for the 1st boot, the ram_data should be set to 0 in order to generate the cache properly.
Light themed with power notification and battery percentage.

DL Desire v4.32.44.12

Themed with he_stheone64.


DL DesireZ v4.1
DL DesireZ v4.0

-- initrd. bugfix for DL DesireZ V4.0:
the new init has some problem in it, we are still working on get it out, before that, provide this update to roll it back to Init v3.0.
-- weather fix for DL Desire Z v4.0  (thanks B-Man2005)
-- GPS fix for DL Desire Z v4.0 and DHD v1.1


Caution:

1. The 1st boot time for both Nand and SD are very long, arond 5-10min for Nand, and maybe more than 10min for SD,
becuase the system will convert the system.img to system.ext2

2. Please boot the system twice after install, no need to config the system after 1st boot into sense, just reboot
   as soon as possible, and also can not use either market or /Updata_DL method to install before doing the boot twice.

3. for ppl want to use data.img with tmous phone modal, please add data_img=1 into your config.txt under /Desire_DL


How to config
=================
the config.txt is now under Desire_DL folder, Normall, no need to config it, system can auto-detect the status and set
the config correctly.

The below config are for advanced user only.


For Nand:
=================
format_ext4=1  //will format the 2nd partition with ext4 (recommended for 1st install,
                         if you have swap partition, it must be 1 for 1st time installation.)
format_ext4=9   //which will auto-partition your SDCard to 3 partitions, and auto-format to ext4.
                        // the 2nd partition is for data partition which size is according to the data_size, default is 512M.
                       //the 3rd partition is for system optimization, system will auto-create it.

swap_mode=1   //will create a vfat swap file to improve the system performance if don't have 3rd partition.
swap_mode=2   //will move the about 160M squashed.sqsh file from system to data partition to release the system space.
                         but you must manually delete the squashed.sqsh file under /system, and keep the swap_mode unchanged.
swap_mode=3  //will create some cache space in nand part, if encounter the slow response during market download and                           
                         install, can choose this.            
nand_data=1  // will make use of the nand parition to optimize the system performance.


For Nand&SD
=================
ram_data=1   //move the dalvik-cache of framwork into RAM, it can improve the system performance a lot
ram_data=11  //roll back to normal status

ram_data=0   //by default, system will create a 16M RAMfs to optimize the performance, can use this to disable it.
ram_size=xxx //by default, system will create a 16M RAMfs to optimize the performance, can use this to change the size.
sd_boost=1    //may improve the SD performnace for both data.img and 2nd partition, it is very much depend on the SD situation.              

Other config:
=================
data_size=xxx  //when create data.img or 2nd partition, will use the size of xxxM.
gps_zone:        //your gps zone country code.
ppp_mode: 0    //will be RMNET mode, 1 for PPP. normally, no need to config it, system will auto set it.

backup_img=1   //will back the data part to backup.gz file under /Desire_DL
restore_img=1   //will restore the data part from backup.gz

backup_img=2 //will back the app from /data to backupapp.gz file under /Desire_DL
restore_img=2 //will restore the data part from backupapp.gz
This is used for restore the app to another build.

repair_mode=1  //will rescue the data partition without losing any app or settings.
repair_mode=2  //will use the MAGLDR load system and repair the Nand system, after that mount the Nand system to
                            /mnt/rescue for further action.
repair_mode=3  //will reset the system, all the modified app in system, framework, lib, fonts that caused the issue will be
                          removed, system will be reset to the origin status without losing data and settings.

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
回复

使用道具 举报

 楼主| 发表于 2011-2-14 23:40:36 | 显示全部楼层
I'm back to the DesireZ v3.4 hastarin 8.6 because of the current drain, which is almost much better  ...
kajos Posted at 2011-2-14 23:14


I'm currently testing the newest Desire Z build, which is based on 1.85, and it says the battery life has a significant improvement.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2011-2-15 10:24:32 | 显示全部楼层
hehe, its languages are only english and franch, need to move more languages into it.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2011-2-15 23:24:32 | 显示全部楼层
haha, managed to solve the language, now, it has full languages and locations, but, then, no boot animation.
回复 支持 反对

使用道具 举报

发表于 2011-2-16 01:12:06 | 显示全部楼层
it doesnt matter ... upload it please!!!!

who cares about BA
回复 支持 反对

使用道具 举报

发表于 2011-2-16 05:24:24 | 显示全部楼层
here dandi look down ... this is what happened with users of a desire hd 1.84 !!!! they got no weather !!!!
i hope you make a release of 1.83 or 1.85 base for desire hd next time !!!!! i hope so ... cause i need weather update


Originally Posted by i rule123  
This build is perfect besides the only problem of the weather app not updating with mobile data  can anyone help??? ive tryed near enough everything
I feel your pain... I've tried what I can with no luck. For some folk it is working well, for the unlucky ones it is not working.

That's life... some you win, some you lose.

Sod it... I'm going to buy an iPhone and get a boyfriend
回复 支持 反对

使用道具 举报

发表于 2011-2-17 00:46:53 | 显示全部楼层
Finally!!
回复 支持 反对

使用道具 举报

发表于 2011-2-17 00:47:00 | 显示全部楼层
Cant wait to try... thanks ..
回复 支持 反对

使用道具 举报

发表于 2011-2-17 00:49:48 | 显示全部楼层
dl now
回复 支持 反对

使用道具 举报

发表于 2011-2-17 00:51:19 | 显示全部楼层
Thanks Dandiest. Will report back
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

手机版|小黑屋|Archiver|DrawChina.com  

GMT+8, 2018-1-21 06:37 , Processed in 0.146978 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表